TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 846 of 1414
TM 9-2320-365-34-2 15-128.2 Change 2 15-8. CARGO BED REPLACEMENT/REPAIR (CONT) (2) Remove nut (7), spacer (8), teflon washer (9), D- ring retainer (10), and D-ring (11) from cast tie down cup (12). g. Tie Down Installation. (1) Position D-ring (1) in D-ring retainer (2). (2) Position teflon washer (3) on D-ring retainer (2). (3) Position D-ring retainer (2) in stamped tie down cup (4) (4) Position washer (5) and nut (6) on D-ring retainer (2). (5) Tighten nut (6) to 76-94 lb-ft (103-128 N•m). NOTE Perform step (2) on tie down with cast cups. NOTE • There are two types of tie down cups installed on cargo beds. On the underside, stamped cups have raised center sections and cast cups have flat center sections. • Steps (1) through (10) require the aid of an assistant. • Perform steps (1) through (5) on tie downs with stamped cups.