TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 845 of 1414
TM 9-2320-365-34-2 Change 2 15-128.1 (3) Align hinge (1) with two holes (3) on cargo bed (4). (4) Match drill and enlarge two holes (3) on cargo bed (4) to 0.327-0.340 in. (8.318-8.636 mm). NOTE Left, right, and rear hinges are installed the same way. Left side shown. (5) Install hinge (2) on cargo bed (4) with two blind rivets (5). g. Tie Down Removal. (1) Remove nut (1), washer (2), teflon washer (3), D- ring retainer (4), and D-ring (5) from stamped tie down cup (6) NOTE • There are two types of tie down cups installed on cargo beds. On the underside, stamped cups have raised center sections and cast cups have flat center sections. • Steps (1) and (2) require the aid of an assistant. • Perform step (1) on tie downs with stamped cups.