TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 84 of 1414
TM 9-2320-365-34-2 3-3. ENGINE ASSEMBLY REPLACEMENT (CONT) (44) Deleted. (45) Install plug (53) in flywheel housing (13.3). NOTE • Steps (46) and (47) require the aid of an assistant. • During installation of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. • Perform steps (46) through (49) on vehicles serial number 0001 through 1477. (46) Remove four screws (56), washers (57), and flywheel cover (58) from flywheel housing (13.3). (47) Position 12 bolts (59) in flexplate (55). (48) Tighten 12 bolts (59) to 18-22 lb-ft (24-28 N·m). NOTE Perform step (49) on vehicles equipped with transmission oil cooler tubes. (49) Position gasket (60) and flywheel cover (58) on flywheel housing (13.3) with four washers (57) and screws (56). (50) Deleted. 3-42 Change 1