TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 834 of 1414
TM 9-2320-365-34-2 15-120 Change 2 15-8. CARGO BED REPLACEMENT/REPAIR This task covers: a. M1078 Removal b. M1078 Installation c. M1081 Removal d. M1081 Installation e. Hinge Removal f. Hinge Installation g. Tie Down Removal h. Tie Down Installation i. Follow-On Maintenance INITIAL SETUP Equipment Conditions Ladder removed (TM 9-2320-365-10). Light material handling crane (LMHC) removed, if equipped (TM 9-2320-365-20-5) Troop seats removed, if equipped (TM 9-2320- 365-10). Cargo cover kit removed, if equipped (TM 9- 2320-365-10). Cargo bed side panels removed, if equipped (TM 9-2320-365-10). Rear fenders and splash guards removed (TM 9- 2320-365-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque 0-175 lb-ft (Item 80, Appendix B) Wrench, Torque 0-600 lb-ft (Item 85, Appendix B) Sling, Cargo (2) (Item 48, Appendix B) Goggles, Industrial (Item 25, Appendix B) Socket Set, Impact (Item 50, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Tools and Special Tools (Cont) Vise, Machinist (Item 72, Appendix B) Nose Assembly (Item 36.1, Appendix B) (TM 9-2320- 365-20) Riveter, Blind Pneumatic (Item 40.1, Appendix B) (TM 9-2320-365-20) Drill Set, Twist (Item 17, Appendix B) Materials/Parts Nut, Self-locking (16) (Item 128, Appendix F) (M1078) Nut, Self-locking (14) (Item 134, Appendix F) (M1081) Bolt (16) (Item 2, Appendix F) (M1078) Bolt (14) (Item 5, Appendix F) (M1081) Lockwasher (24) (Item 111, Appendix F) (M1081) Nut, Self-locking (4) (Item 148, Appendix F) (M1081) Nut, Self-locking (4) (Item 132, Appendix F) Rivet, Blind (20) (Item 249.1, Appendix F) Personnel Required (4) References TM 43-0139 a. M1078 Removal. (1) Remove four stakes (1) from cargo bed (2). WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel.