TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 831 of 1414
TM 9-2320-365-34-2 (10) Pull LH and RH ends of twine up to top corners (4 and 5) of windshield (1) as shown. (11) Insert sides of seal (2) evenly with cab (3) using windshield setting tool and soft head hammer. (12) Pull LH side of twine over to RH side of cab (3) until completely removed from seal (2). (13) Insert top of seal (2) evenly with cab (3) using windshield setting tool and rubber hammer. NOTE Start at lower RH side of windshield (14) Check seal (2) for proper installation, adjust as required with windshield setting tool and soft head hammer. NOTE • Perform steps (15) through (17) on M1081. • Left and right defrost covers are installed the same way. Left defrost cover shown. (15) Install defrost cover (6) on windshield frame (7) with four washers (8) and screws (9). (16) Perform step (15) on right defrost cover. Change 1 15-117