TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 820 of 1414

TM 9-2320-365-34-2 15-6. M1081 CAB WINDSHIELD FRAME REPLACEMENT/REPAIR (CONT) (7) Position sunvisor (11) on windshield frame (2) with four screws (12). (8) Tighten four screws (12) to 22-27 lb-in. (2-3 N·m). (9) Install seal (13) on windshield frame (2). CAUTION Use care when installing captive screws. Failure to comply may result in damage to equipment. NOTE • Lubricate captive screws prior to installation. • All captive screws are installed the same way. One shown. • Tighten nut until captive screw is seated. (10) Install captive screw (14) in windshield frame (2) with washer and nut. (11) Remove nut and washer from captive screw (14). (12) Perform steps (10) and (11) on remaining nine captive screws. (13) Position five centering cups (15) on windshield frame (2) with five screws (16). (14) Tighten five screws (16) to 62-124 lb-in. (7-14 N·m). 15-112