TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 815 of 1414
TM 9-2320-365-34-2 15-6. M1081 CAB WINDSHIELD FRAME REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions M1081 cab roof removed (TM 9-2320-365-20-4). Cab windshield removed (para 15-7). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench Set, Socket (TM 9-2320-365-20) Socket Set, Socket Wrench (Item 51, Appendix B) Materials/Parts Washer, Flat (Item 91, Appendix C) Nut, Self-locking (Item 52, Appendix C) Lockwasher (Item 97, Appendix F) Screw, Captive (10) (Item 253, Appendix F) Seal (79 in. (2000 mm)) (Item 254, Appendix F) Lubricating Oil, Engine (Item 48, Appendix C) Seal (2) (87 in. (2200 mm)) (Item 254, Appendix F) Personnel Required (3) a. Removal. NOTE Left and right side wiper arms are removed the same way. Left side shown. (1) Disconnect windshield washer hose (1) from fitting (2). (2) Lift cover (3) at base of wiper arm (4). (3) Remove nut (5) and lockwasher (6) from wiper arm shaft (7). Discard lockwasher. NOTE Mark position of wiper arm prior to removal. (4) Remove wiper arm (4) from wiper arm shaft (7). (5) Perform steps (1) through (4) on right side wiper arm. 15-107