TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 784 of 1414
TM 9-2320-365-34-2 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT) (26) Install pivot arm (4), spacer (34), washer (35), and cotter pin (36) on cab tilt cylinder mounting bolt (31). (27) Raise cab (TM 9-2320-365-10). (28) Connect three pneumatic hoses (37) to 45-degree fittings (38). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (29) Apply sealing compound to threads of two screws (39). (30) Position two screws (39) in left side bearing housing (25). (31) Tighten two screws (39) to 34-42 lb-ft (47-57 N·m). (32) Perform steps (29) through (31) on right side bearing housing. (33) Position steering column universal joint (40) on steering gear (41) with matchmarks aligned. (34) Position screw (42) and self-locking nut (43) in steering column universal joint (40). (35) Tighten self-locking nut (43) to 31-39 lb-ft (43-53 N·m). 15-78