TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 782 of 1414
TM 9-2320-365-34-2 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT) WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (16) Apply sealing compound to threads of four screws (28). (17) Position four screws (28) in right side bearing housing (25). (18) Tighten four screws (28) and two screws (26) to 34-42 lb-ft (47-57 N·m). (19) Perform steps (14) through (18) on left side bearing housing. CAUTION Align arrow on top of tilt cylinder mounting eye to point toward front of cab. Failure to comply may result in damage to equipment. (20) Position cab tilt cylinder mounting eye (29) in cab tilt cylinder mounting bracket (30). (21) Position cab tilt cylinder mounting bolt (31) in cab tilt cylinder mounting bracket (30) and cab tilt cylinder mounting eye (29) with self-locking nut (32). (22) Tighten self-locking nut (32) to 180-232 lb-ft (244-314 N·m). 15-76 Change 1