TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 780 of 1414
TM 9-2320-365-34-2 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT) (5) Position two lower resilient mounts (16) on front bumper mounting brackets (15) with two bolts (17), washers (18), and self-locking nuts (19). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (6) Apply sealing compound to threads of shoulder bolt (20). (7) Position shoulder bolt (20), washer (21), and nut (22) in cab mounting bracket (1). (8) Tighten two self-locking nuts (19) to 199-243 lb-ft (270- 330 N·m). (9) Tighten nut (22) to 40-48 lb-ft (54-66 N·m). (10) Perform steps (7) through (9) on right side cab mounting bracket. 15-74