TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 768 of 1414
TM 9-2320-365-34-2 15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT) WARNING Cab must be braced on cab support tool prior to removal of cotter pin from cab tilt cylinder mounting bolt. Failure to comply may result in injury to personnel or damage to equipment. (52) Install cab support tool on engine rear lifting eye (90). (53) Lower cab until cab rests on cab support tool (TM 9- 2320-365-10). (54) Remove cotter pin (91) and washer (92) from cab tilt cylinder mounting bolt (93). Discard cotter pin. (55) Loosen self-locking nut (94) on cab tilt cylinder mounting bolt (93). (56) Raise cab slightly and remove cab support tool from engine rear lifting eye (90) (TM 9-2320-365-10). 15-66