TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 752 of 1414
TM 9-2320-365-34-2 15-2. CAB REPLACEMENT (CONT) (40) Connect two hoses (59) to 90-degree fittings (60). (41) Connect two hoses (61) to 45-degree fittings (62). (42) Connect hose (63) to tee fittings (64). (43) Install terminal lugs TL201 (65) and TL202 (66) on air pressure transmitter (67) with two lockwashers (68) and nuts (69). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (43.1) Apply sealing compound to nuts (69), lockwashers (68), and terminal lugs TL201 (65) and TL202 (66). NOTE Perform steps (47) and (48) on vehicle serial number 7748 and higher and vehicle serial numbers 0001 through 7447 that have previously had front lights cable assembly replaced. (43.2) Install boot (69.1) on lower pressure transmitter (69). (43.3) Apply antiseize to holes TLR and TTR and around edges of boot (69.1). 15-52 Change 1