TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 746 of 1414
TM 9-2320-365-34-2 15-2. CAB REPLACEMENT (CONT) CAUTION Do not allow cab latch to change position while tightening screws. Failure to comply may result in damage to equipment. (23.1) Tighten two screws (20.1) to 34-44 lb-ft (44-60 N·m). (24) Install locking arms (21), spacer (22), washer (23), and cotter pin (24) on cab tilt cylinder mounting bolt (18). (25) Raise cab (TM 9-2320-365-10). (26) Remove cab support tool from engine rear lifting eye (20). 15-48 Change 1