TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 745 of 1414
TM 9-2320-365-34-2 (21) Remove spreader bar, cargo sling and rubber sheet from cab (2). CAUTION Cab latch must be adjusted so that it rides squarely on the latch support and does not contact the welded area of the latch support. Failure to comply may result in damage to equipment. (21.1) Adjust cab latch (19.1) on latch supports (19.2). WARNING Brace cab with cab support tool before installing locking arm, spacer, washer, and cotter pin on tilt cylinder mounting bolt. Failure to comply may result in serious injury or death to personnel. (22) Raise cab enough to install cab support tool on engine rear lifting eye (20) (TM 9-2320-365-10). WARNING After cab is lowered on cab support tool, return cab tilt selector knob to the RAISE position for added safety. Failure to comply may result in injury to personnel. (23) Lower cab on cab support tool (TM 9-2320-365-10). Change 1 15-47