TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 743 of 1414
TM 9-2320-365-34-2 NOTE Perform steps (10) through (16) if rear weld nuts are damaged. (10) Measure and mark a line (7) half way 0.625 in. (15.6 mm) between two forward weld nuts (8). (11) Measure and mark a line (9) 4.500 in. (112.5 mm) in back from front weld nuts (8) on line (10). (12) Drill a pilot hole at intersection of lines (9 and 10). (13) Drill a 2 in. (49 mm) hole at pilot hole. (14) Remove damaged weld nut (11). NOTE Steps (15) and (16) require the aid of an assistant. (15) Position screw (12) and self-locking nut (13) in cab support (3). (16) Tighten screw (12) to 42-52 lb-ft (57-71 N·m). Change 1 15-45