TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 742 of 1414
TM 9-2320-365-34-2 15-2. CAB REPLACEMENT (CONT) CAUTION Lower cab straight down to clear radiator. Failure to comply may result in damage to equipment. NOTE Right and left side cab front support mounts are connected the same way. Right side shown. (3) Position cab (2) on two cab front support mounts (3). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. Failure to comply may result in injury to personnel. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of two screws (4). (5) Position two washers (5) and screws (4) in right side cab front support mount (3). (6) Apply sealing compound to threads of four screws (6). (7) Position four screws (6) in right side cab front support mount (3). (8) Tighten four screws (6) and two screws (4) to 32-42 lb-ft (45-57 N·m). (9) Perform steps (3) through (8) on left side cab front support mount. 15-44 Change 1