TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 707 of 1414
TM 9-2320-365-34-2 NOTE Steps (37) and (38) require the aid of an assistant. (37) Disengage locking arm (72) and spacer (73) from cab tilt cylinder mounting bolt (69). (38) Remove self-locking nut (74), cab tilt cylinder mounting bolt (69) and cab tilt cylinder (75) from bracket (76). Discard self-locking nut. (39) Match mark remote control cam (77) to cab tilt cylinder (76) prior to removal. (40) Swing cab tilt cylinder (76) back out of way and remove control cam (77) and spring washer (78) from cab tilt cylinder (76). Discard spring washer. CAUTION Use spreader bar and place sheet rubber on cargo sling to prevent damage to cab roof. Failure to comply may result in damage to equipment. (41) Lower cab door windows and install cargo sling through rear section of cab doors (79). 15-11