TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 694 of 1414

TM 9-2320-365-34-2 14-7. STABILIZER MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Rear stabilizer bar removed (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Socket Set, Impact (Item 50, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (Item 74, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Bolt (6) (Item 6, Appendix F) Nut, Self-Locking (6) (Item 134, Appendix F) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Left and right side stabilizer mounting brackets are removed the same way. Right side shown. Remove three collars (1), bolts (2), and mounting bracket (3) from frame (4). Discard collars and bolts. 14-36