TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 682 of 1414
TM 9-2320-365-34-2 14-5. FRONT SPRING BRACKETS REPLACEMENT (CONT) (6) Install cab tilt cylinder (8) on cab tilt cylinder bracket (5) with washer (9) and cotter pin (10). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Steps (7) through (13) apply to left side front spring front bracket. (7) Apply sealing compound to threads of two bolts (11). (8) Position left front spring front bracket (12) on left frame rail (13) with two bolts (11). (9) Tighten two bolts (11) to 195-240 lb-ft (265-325 N·m). 14-24