TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 681 of 1414
TM 9-2320-365-34-2 (12) Remove three self-locking nuts (22), bolts (23), cab tilt cylinder bracket (21), and plate (24) from right frame rail (25). Discard self-locking nuts. (13) Remove two bolts (26) and right front spring front bracket (27) from right frame rail (25). b. Front Spring Front Bracket Installation. WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Perform steps (1) through (6) on right side front spring front bracket. (1) Apply sealing compound to threads of two bolts (1). (2) Position right front spring front bracket (2) on right frame rail (3) with two bolts (1). (3) Tighten two bolts (1) to 195-240 lb-ft (265-325 N·m). (4) Position plate (4) and cab tilt cylinder bracket (5) on right frame rail (3) with three bolts (6) and self-locking nuts (7). (5) Tighten three self-locking nuts (7) to 210-225 lb-ft (285- 305 N·m). 14-23