TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 668 of 1414
TM 9-2320-365-34-2 14-3. FRONT LEAF SPRING SHACKLE AND PIN REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Hydraulic reservoir removed, if equipped (left side) (TM 9-2320-365-20-4). Gravel deflector and gravel deflector extension removed (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Jack, Dolly Type, Hydraulic (Item 31, Appendix B) Tools and Special Tools (Cont) Trestles, Motor Vehicle Maintenance (2) (Item 71, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Nut, Self-locking (3) (Item 138, Appendix F) Grease, Automotive and Artillery (Item 36, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Deleted. (2) Deleted. (3) Remove wheel on side that spring is being removed (TM 9-2320-365-10). 14-10 Change 1