TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 649 of 1414
TM 9-2320-365-34-2 13-19. RADIATOR BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab front support removed (para 15-3). Steering gear removed (para 12-2). Radiator/charger air cooler removed (TM 9-2320- 365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Tools and Special Tools (Cont) Socket Set, Impact (Item 50, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Nut, Self-locking (3) (Item 134, Appendix F) Bolt (2) (Item 14, Appendix F) Bolt (Item 5, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Left and right side radiator brackets are removed the same way. Left side shown. • Steps (1) and (2) require the aid of an assistant. (1) Remove collar (1) and bolt (2) from radiator bracket (3). Discard collar and bolt. (2) Remove two collars (4), bolts (5), and radiator bracket (3) from frame rail (6). Discard collars and bolts. (3) Remove two bolts (7) from radiator bracket (3). 13-89