TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 645 of 1414
TM 9-2320-365-34-2 13-17. INTERMEDIATE CROSSMEMBER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions One frame rail removed (para 13-13). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Socket Set, Impact (Item 50, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 25, Appendix B) Sling, Cargo (2) (Item 48, Appendix B) Materials/Parts Bolt (4) (Item 13, Appendix F) Nut, Self-locking (4) (Item 134, Appendix F) Personnel Required (2) a. Removal. WARNING Intermediate crossmember weighs approximately 75 lbs (34 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in damage to equipment or injury to personnel. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Step (1) requires the aid of an assistant. • Both intermediate crossmembers are removed the same way. Front intermediate crossmember shown. Remove four collars (1), bolts (2), and intermediate crossmember (3) from frame rail (4). Discard collars and bolts. 13-85