TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 636 of 1414
TM 9-2320-365-34-2 13-76 Change 2 13-15. M1081 SUBFRAME RAIL REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions M1081 Parachute suspension assembly removed (para 13-4). Particle extraction tube removed (TM 9-2320-365-20- 3). Tool box removed (TM 9-2320-365-20-4). Hydraulic manifold removed (TM 9-2320-365-20-4). Fuel tank removed (TM 9-2320-365-20-3). Hydraulic reservoir removed, if equipped (TM 9-2320- 365-20-4). Tools and Special Tools Tool Kit, Gen Mech (Item 68, Appendix B) Wrench, Torque 0-600 lb-ft (Item 85, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Socket Set, Impact (Item 50, Appendix B) Materials/Parts Nut, Self-locking (11) (Item 134, Appendix F) Bolt (5) (Item 5, Appendix F) Personnel (3) a. Removal. (1) Remove four self-locking nuts (1) and bolts (2) from front lifting bracket (3). Discard self-locking nuts. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE • Left and right side subframe rails are removed the same way. Right side shown. • Steps (1) through (4) require the aid of an assistant.