TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 614 of 1414
TM 9-2320-365-34-2 13-13. FRAME RAIL REPLACEMENT INITIAL SETUP (CONT) Materials/Parts Nut, Self-locking (2) (Item 132, Appendix F) (LH side) Nut, Self-locking (11) (Item 145, Appendix F) (LH side) Nut, Self-locking (8) (Item 145, Appendix F) (RH side) Nut, Self-locking (2) (Item 126, Appendix F) Bolt (4) (Item 5, Appendix F) (M1081) Bolt (7) (Item 5, Appendix F) (M1078/M1079) Bolt (10) (Item 14, Appendix F) (M1081) Bolt (16) (Item 14, Appendix F) (M1078/M1079) Materials/Parts (Cont) Bolt (2) (Item 15, Appendix F) Bolt (2) (Item 13, Appendix F) Nut, Self-locking (24) (Item 134, Appendix F) (M1081) Nut, Self-locking (33) (Item 134, Appendix F) (M1078/M1079) Bolt (6) (Item 12, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. LH Removal. (1) Remove eight self-locking nuts (1), bolts (2), and clamps (3) from frame rail (4). Discard self-locking nuts. (2) Remove self-locking nut (5), bolt (6), and clamp (7) from frame rail (4). Discard self-locking nut. (3) Remove two self-locking nuts (8), bolts (9), and brackets (10) from frame rail (4). Discard self-locking nuts. 13-54 Change 1