TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 606 of 1414
TM 9-2320-365-34-2 13-12. FRONT LIFTING BRACKET REPLACEMENT (CONT) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (7) Position lower front lifting bracket support crossmember (6) on front lifting bracket (1) with four bolts (7) and self- locking nuts (8). (8) Tighten four self-locking nuts (8) to 117-131 lb-ft (159- 178 N·m). WARNING Lifting beam weighs approximately 75 lbs (34 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Left and right side lifting beams are installed the same way. Right side shown. (9) Position lifting beam (9) in front lifting bracket (1) with two pins (10). (10) Perform step (9) on left side lifting beam. 13-46