TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 592 of 1414

TM 9-2320-365-34-2 13-10. M1081 ANGLE BRACKET REPLACEMENT This task covers: a. LH Removal b. LH Installation c. RH Removal d. RH Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Air dryer removed (LH side) (TM 9-2320-365-20-5). Muffler and heat shield removed (RH side) (TM 9 2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Socket Set, Impact (Item 50, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Nut, Self-locking (6) (Item 134, Appendix F) (LH side) Bolt (6) (Item 5, Appendix F) (LH side) Nut, Self-locking (4) (Item 134, Appendix F) (RH side) Bolt (4) (Item 5, Appendix F) (RH side) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. LH Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Step (1) requires the aid of an assistant. Remove six collars (1), bolts (2), and angle bracket (3) from frame rail (4). Discard collars and bolts. 13-32