TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 590 of 1414
TM 9-2320-365-34-2 13-9. REAR SPRING BRACKETS REPLACEMENT (CONT) b. Installation. NOTE • Left and right side rear spring brackets are installed the same way. Right side shown. • Steps (1) through (10) require the aid of an assistant. (1) Position rear spring bracket (1) on frame rail (2) with two bolts (3) and self-locking nuts (4). (2) Position three bolts (5) and self-locking nuts (6) in rear spring bracket (1). (3) Position bolt (7) and self-locking nut (8) in rear spring bracket (1). (4) Tighten two self-locking nuts (4), three self-locking nuts (6) and self-locking nut (8) to 210-225 lb-ft (285-305 N·m). NOTE Lubricate pin before installation. (5) Install leaf spring (9) in rear spring bracket (1) with spring pin (10). (6) Install lubrication fitting (11) in spring pin (10). (7) Position screw (12) and nut (13) in rear spring bracket (1). (8) Tighten nut (13) to 76-94 lb-ft (103-127 N·m). 13-30