TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 588 of 1414
TM 9-2320-365-34-2 13-9. REAR SPRING BRACKETS REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Rear wheel removed (from side being replaced) (TM 9- 2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Goggles, Industrial (Item 25, Appendix B) Jack, Dolly Type, Hydraulic (Item 31, Appendix B) Trestles, Motor Vehicle Maintenance (2) (Item 71, Appendix B) Materials/Parts Bolt (2) (Item 5, Appendix F) Bolt (1) (Item 8, Appendix F) Bolt (3) (Item 10, Appendix F) Nut, Self-locking (6) (Item 134, Appendix F) Nut, Self-locking (2) (Item 138, Appendix F) Grease, Automotive and Artillery (GAA) (Item 36, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE • Left and right side rear spring brackets are removed the same way. Right side shown. • Steps (1) through (8) require the aid of an assistant. (1) Place two trestles under frame (1). (2) Position floor jack under rear axle (2) and lift enough to take weight off leaf spring (3). 13-28