TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 587 of 1414
TM 9-2320-365-34-2 (3) Remove two collars (4), bolts (5), and rear bumper (3) from vehicle. Discard collars and bolts. b. Installation. NOTE • Steps (1) through (4) require the aid of an assistant. • Left and right side or rear bumper is installed the same way. Left side shown. (1) Position rear bumper (1) on vehicle with two bolts (2) and self-locking nuts (3). (2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). (3) Position five bolts (4) and self-locking nuts (5) in rear bumper (1). (4) Tighten five self-locking nuts (5) to 210-225 lb-ft (285- 305 N·m). (5) Perform steps (3) and (4) on right side of rear bumper. c. Follow-On Maintenance. Install rear fenders (TM 9-2320-365-20-4). End of Task. 13-27