TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 586 of 1414
TM 9-2320-365-34-2 13-8. REAR BUMPER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Rear fenders removed (TM 9-2320-365-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Socket Set, Impact (Item 50, Appendix B) Materials/Parts Bolt (12) (Item 3, Appendix F) Nut, Self-locking (12) (Item 134, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Step (1) requires the aid of an assistant. • Left and right side or rear bumper is removed the same way. Left side shown. (1) Remove five collars (1) and bolts (2) from rear bumper (3). Discard collars and bolts. (2) Perform step (1) on right side of rear bumper. 13-26