TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 574 of 1414
TM 9-2320-365-34-2 13-6. REAR CROSSMEMBER REPLACEMENT (CONT) CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Left and right side of rear crossmember is removed the same way. Left side shown. • Steps (5) through (8) require the aid of an assistant. (5) Remove collar (9) and bolt (10) from rear crossmember (5). Discard collar and bolt. (6) Remove five collars (11) and bolts (12) from rear crossmember (5). Discard collars and bolts. (7) Perform steps (5) and (6) on right side of rear crossmember (5). (8) Remove rear crossmember (5) from vehicle. b. Installation. NOTE • Left and right side of rear crossmember is installed the same way. Left side shown. • Steps (1) through (4) require the aid of an assistant. (1) Position rear crossmember (1) on vehicle with five bolts (2) and self-locking nuts (3). (2) Tighten five self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). 13-14