TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 571 of 1414
TM 9-2320-365-34-2 b. Installation. NOTE • Steps (1) through (9) require the aid of an assistant. • Left and right side of rear tension beam is installed the same way. Left side shown. • Perform steps (1) and (2) on model M1081. (1) Position rear tension beam (1), load spreader bracket (2), and taillight mounting bracket (3) on vehicle with two bolts (4) and self-locking nuts (5). (2) Tighten two self-locking nuts (5) to 210-225 lb-ft (285- 305 N·m). NOTE Perform steps (3) and (4) on model M1078/M1079. (3) Position taillight mounting bracket (3) on rear tension beam (1) with two bolts (6) and self-locking nuts (7). (4) Tighten two self-locking nuts (7) to 210-225 lb-ft (285- 305 N·m). (5) Position three bolts (8) and self-locking nuts (9) in rear tension beam (1). (6) Tighten three self-locking nuts (9) to 210-225 lb-ft (285- 305 N·m). (7) Install shackle (10) on rear tension beam (1) with pin (11). Change 1 13-11