TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 569 of 1414
TM 9-2320-365-34-2 13-5. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Taillight carriers removed (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Bolt (14) (Item 10, Appendix F) (M1078/M1079) Nut, Self-locking (14) (Item 134, Appendix F) Bolt (10) (Item 10, Appendix F) (M1081) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Left and right side of rear tension beam is removed the same way. Left side shown. • Steps (1) through (5) require the aid of an assistant. (1) Remove two collars (1) and bolts (2) from rear tension beam (3). Discard collars and bolts. Change 1 13-9