TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 567 of 1414
TM 9-2320-365-34-2 13-4. M1081 PARACHUTE SUSPENSION ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance. INITIAL SETUP Equipment Conditions Parachute slide assemblies removed (TM 9-2320- 365-20-3). Cargo bed removed (para 15-8). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Tools and Special Tools (Cont) Sling, Cargo (Item 48, Appendix B) Materials/Parts Nut, Self-locking (32) (Item 135, Appendix F) Personnel Required (2) a. Removal. NOTE Steps (1) through (4) require the aid of an assistant. (1) Remove 16 self-locking nuts (1) and bolts (2) from parachute suspension assembly (3). Discard self-locking nuts. (2) Perform step (1) on left side of parachute suspension assembly. WARNING Parachute suspension assembly weighs approximately 250 lbs (113 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in damage to equipment or injury to personnel. (3) Remove lanyard (4) from parachute suspension assembly (3). (4) Remove parachute suspension assembly (3) from vehicle. 13-7