TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 565 of 1414
TM 9-2320-365-34-2 13-3. FRONT ANGLE BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Resilient mount removed (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Goggles, Industrial (Item 25, Appendix B) Adapter, Socket Wrench (Item 1, Appendix B) Tools and Special Tools Socket Set, Impact (Item 50, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Materials/Parts Nut, Self-Locking (2) (Item 128, Appendix F) Bolt (2) (Item 2, Appendix F) WARNING Wear appropriate eye protection when working under vehicle. Falling debris may cause eye injury. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Left and right side front angle brackets are removed the same way. Left side shown. Remove two collars (1), bolts (2), and front angle bracket (3) from frame (4). Discard bolts and collars. 13-5