TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 562 of 1414
TM 9-2320-365-34-2 Section II. MAINTENANCE PROCEDURES 13-2. M1081 SIDELOAD BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Wrench, Torque, 0-150 lb-ft (Item 78, Appendix B) Crowfoot Attachment, Socket Wrench (TM 9-2320- 365-20) Tools and Special Tools (Cont) Socket Set, Impact (Item 50, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Materials/Parts Nut, Self-locking (6) (Item 134, Appendix F) Bolt (Item 4, Appendix F) Bolt (5) (Item 5, Appendix F) Nut, Self-locking (Item 148, Appendix F) Personnel Required (2) a. Removal. NOTE • Left and right side sideload brackets are removed the same way. Left side shown. • Steps (1) through (4) require the aid of an assistant. (1) Remove self-locking nut (1) and bolt (2) from sideload bracket (3). Discard self-locking nut. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. (2) Remove three collars (4) and bolts (5) from sideload bracket (3). Discard collars and bolts. 13-2