TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 557 of 1414
TM 9-2320-365-34-2 NOTE Steps (33) and (34) must be performed together. (33) Turn steering wheel to right until stops are reached and hold for ten seconds. (34) Check pressure reading on STE/ICE-R. Pressure reading should be between 500-1000 psi (3448-6895 kPa). (35) Turn wheels straight ahead. NOTE If pressure reading is not within range, bottom adjustment screw is turned to right to increase pressure or turned to left to decreases pressure. (36) Loosen locknut (16) on bottom adjustment screw (19). (37) Adjust bottom adjustment screw (19) to left or right. (38) Turn steering wheel to right until stops are reached and verify pressure is 650-750 psi (4482-5171 kPa). (39) Turn wheels straight ahead. CAUTION Ensure adjustment screw does not turn when tightening locknut. Failure to comply may result in damage to equipment. NOTE Repeat steps (37) through (38) until pressure reading of 650-750 psi (4482-5171 kPa) is obtained. (40) Tighten locknut (16) on bottom adjustment screw (19) to 22 lb-ft (30 N·m). (41) Turn steering wheel to left until stops are reached and hold for ten seconds. (42) Check pressure reading on STE/ICE-R. Pressure reading should be between 500-1000 psi (3448-6895 kPa). 12-13