TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 553 of 1414
TM 9-2320-365-34-2 12-3. STEERING GEAR ASSEMBLY ADJUSTMENT This task covers: a. Adjustment INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Trestle, Motor Vehicle Maintenance (2) (Item 71, Appendix B) Pan, Drain (Item 36, Appendix B) STE/ICE-R (Item 60, Appendix B) Crowfoot, Attachment (Item 14, Appendix B) Gage, Steering Stop Shim (2) (Item 17, Appendix D) Jack, Dolly Type Hydraulic (2) (Item 31, Appendix B) Materials/Parts Coupling, Pipe (Item 25, Appendix C) Tee, Pipe to Tube (Item 86, Appendix C) Lubricating Oil, Engine (Item 44, Appendix C) Ties, Cable, Plastic (Item 89, Appendix C) Personnel Required (2) References: TM 9-4910-571-12 & P a. Adjustment. (1) Remove two screws (1) and washers (2) from front grille (3). (2) Remove screw (4), washer (5), and front grille (3) from cab (6). NOTE Step (3) and (4) require the aid of an assistant. (3) Raise front axle (7) until wheels are off ground. (4) Place two trestles under front axle (7). 12-9