TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 551 of 1414
TM 9-2320-365-34-2 (16) Install steering gear arm universal joint (13) on steering gear input shaft (14). (17) Position bolt (15) and self-locking nut (16) on universal joint (13). (18) Tighten self-locking nut (16) to 32-39 lb-ft (43-53 N m). (19) Install drag link end (17) in steering pitman arm (2). (20) Position nut (18) on drag link end (17). (21) Tighten nut (18) to 232-284 lb-ft (315-385 N m). NOTE After tightening nut to correct torque, tighten again until hole in drag link end is aligned with slots in nut. (22) Install cotter pin (19) in nut (18). (23) Install power steering supply hose (20) on supply port adapter (5). 12-7