TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 549 of 1414
TM 9-2320-365-34-2 (17) Remove supply port adapter (5) from steering gear assembly (14). (18) Remove nut (23) and steering pitman arm (24) from output shaft (25). (19) Remove steering gear assembly (14) from vise. b. Installation. (1) Position steering gear assembly (1) in vise. CAUTION Ensure marks on steering gear output shaft and pitman arm are aligned. Failure to comply may result in damage to equipment. (2) Install steering pitman arm (2) on output shaft (3). (3) Position nut (4) on output shaft (3). (4) Tighten nut (4) to 365-446 lb-ft (495-605 N m). (5) Stake nut (4) to output shaft (3) at a minimum depth of 0.1 in. (2.5 mm). (6) Install supply port adapter (5) in steering gear assembly (1). 12-5