TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 542 of 1414

TM 9-2320-365-34-2 11-2. AIR COMPRESSOR REPLACEMENT (CONT) (15) Connect ether sensor switch connector (21) to electrical connector P-42 (22). (16) Connect connector clamp (23) on either sensor switch connector (21). (17) Install clamp (24) on bracket (25) with screw (26), washer (27), and self-locking nut (28). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (17.1) Apply sealant to threads of bolt (31). (18) Position support bracket (29) on air compressor (1) with washer (30) and bolt (31). (19) Position two washers (32) and bolts (33) in bracket (29). (20) Tighten bolt (31) to 28-38 lb-ft (38-52 N·m). (21) Tighten two bolts (33) to 25-31 lb-ft (35-43 N·m). (21.1) Tighten bolt (34) to 18-22 lb-ft (24-30 N·m). 11-8 Change 1