TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 522 of 1414
TM 9-2320-365-34-2 10-2. REAR AXLE ASSEMBLY REPLACEMENT (CONT) (26) Install 45-degree fitting (35) on rear axle assembly (1). (27) Install axle breather tube (36) on 45-degree fitting (35). (28) Connect load spring (37) on rear axle assembly (1) with screw (38). c. Follow-On Maintenance. (1) Service differential carrier (TM 9-2320-365-10). (1.1) Lubricate drive shaft universal joint and slip yoke (TM 9- 2320-365-20-1). (2) Install rear stabilizer bar (TM 9-2320-365-20-3). (3) Install rear wheels (TM 9-2320-365-10). (4) Start engine (TM 9-2320-365-10). (5) Operate vehicle and check for proper steering and drive operation. Listen for unusual noises and vibration (TM 9-2320-365-10). (6) Shut down engine (TM 9-2320-365-10). (7) Check rear axle assembly and rear axle differential carrier for air leaks. (8) After 1000 miles of vehicle operation, tighten four self- locking nuts on U-bolts in increments of 50 lb-ft (271 N·m) to 390-510 lb-ft (529-692 N·m) in sequence. End of Task. 10-10 Change 1