TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 518 of 1414
TM 9-2320-365-34-2 10-2. REAR AXLE ASSEMBLY REPLACEMENT (CONT) NOTE Left and right side of U-bolts and mounting pads are installed the same way. Left side shown. (11) Position rear axle assembly (1) under vehicle. (12) Install two U-bolts (14) on rear leaf spring (15). NOTE Align hose on mounting pad with stud protruding from bottom of leaf spring. (13) Position mounting pad (16) on two U-bolts (14) with four washers (17) and self-locking nuts (18). (14) Tighten four self-locking nuts (18) to 200 lb-ft (271 N·m). (15) Re-tighten four self-locking nuts (18) in increments of 50 lb-ft (271 N·m) to 390-510 lb-ft (529-692 N·m) in sequence shown. NOTE Left and right side shock absorbers are installed the same way. Right side shown. (16) Position shock absorber (19) on rear axle assembly (1) with bolt (20), two washers (21), and nut (22). (17) Tighten nut (22) to 398-487 lb-ft (540-660 N·m). (18) Remove transmission/differential lift from under vehicle. (18.1) Perform steps (12) through (18) on left side of rear axle assembly. 10-8 Change 1