TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 512 of 1414
TM 9-2320-365-34-2 10-2. REAR AXLE ASSEMBLY REPLACEMENT (CONT) WARNING Rear axle assembly weighs approximately 1580 lbs (717 kgs). Rear axle assembly must be supported on a transmission/ differential lift during removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Steps (14) through (18) require the aid of an assistant. • Left and right side shock absorbers are removed the same way. Right side shown. (14) Position transmission/differential lift under rear axle assembly (3) and secure with chain. (15) Remove nut (23), two washers (24), and bolt (25) from shock absorber (26). NOTE Left and right side U-bolts and mounting pads are removed the same way. Right side shown. (16) Remove four self-locking nuts (27), washers (28), and mounting pad (29) from two U-bolts (30). Discard self- locking nuts. (17) Remove two U-bolts (30) from rear left spring (31). Discard U-bolts. (18) Remove rear axle assembly (3) from vehicle. (18.1) Perform steps (14) through (18) on left side of rear axle assembly. 10-4 Change 1