Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 499 of 1414

TM 9-2320-365-34-2 Change 2 9-21 (9) Tighten four screws (11). (9.1) Tighten four screws (11) to 26-35 lb-ft (35-47 N•m). (9.2) Fold tabs on four screws (11). (10) Apply lubrication to grease fittings (TM 9-2320-366-20). c. Follow-On Maintenance. (1) Check differential oil level (TM 9-2320-365-20). (1.1) Lubricate drive shaft universal joint and slip yoke (TM 9- 2320-365-20-1). (2) Operate vehicle and check differential for proper operation (TM 9-2320-365-10). (3) Shut down engine (TM 9-2320-365-10). (4) Check pinion seal for oil leaks. End of Task. CAUTION Grease must flow from all four seals. Failure to comply may result in damage to equipment. NOTE • Perform the following step on kits equipped with shear head screws. • Alternately tighten screws • When correct torque is reached, bearing cap small screw hex head will break off. NOTE Perform the following two steps on bearing cups equipped with tabs