TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 497 of 1414
TM 9-2320-365-34-2 Change 2 9-20.1 b. Installation. (1) Apply a small amount of sealing compound to outside edge and spring cavity of pinion seal (1). (2) Install pinion seal (1) in front differential carrier (2). (3) Visually verify pinion seal (1) is properly seated. (4) Install yoke seal (3) on drive yoke (4). (5) Install drive yoke (4) on pinion shaft (5) with drive yoke nut (6). (6) Tighten drive yoke nut (6) to 920-1130 lb-ft (1248- 1532 N•m). (7) Remove drive shaft (7) from leaf spring (8). NOTE Step (7) requires the aid of an assistant.