TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 483 of 1414
TM 9-2320-365-34-2 9-3. FRONT AXLE SHAFT AND SEALS REPLACEMENT This task covers: a. Removal b. Cleaning/Inspection c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Wheel bearing/CTIS seal removed (TM 9-2320- 365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Puller, Mechanical (Item 45, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Respirator, Air Filtering (Item 46, Appendix B) Driver, Front Axle Shaft Seal (Item 42, Appendix D) Materials/Parts Rag, Wiping (Item 59, Appendix C) Seal, Plain Encased (2) (Item 269, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) Grease, Automotive and Artillery (Item 36, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Tag brake hoses and connection points prior to disconnecting. (1) Disconnect two brake hoses (1) from front brake air chamber (2). 9-11