TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 475 of 1414

TM 9-2320-365-34-2 WARNING Front axle assembly weighs approximately 1580 lbs (717 kgs). Front axle assembly must be supported on a transmission/ differential lift during installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (4) requires the aid of two assistants. (4) Position front axle assembly (6) under vehicle. NOTE Left and right sides of front axle assembly is installed the same way. Right side shown. (5) Install two U-bolts (7) on leaf spring (8). (6) Align hole on mounting pad (9) with stud protruding from bottom of leaf spring. (7) Position mounting pad (9) on U-bolts (7) with four self- locking nuts (10). (8) Tighten four self-locking nuts (10) to 200 lb-ft (271 N·m) in sequence shown. (9) Re-tighten four self-locking nuts (10), in 50 lb-ft (68 N·m) increments, to 390-510 lb-ft (529-692 N·m) in sequence shown. Change 1 9-7