TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 470 of 1414
TM 9-2320-365-34-2 Section II. MAINTENANCE PROCEDURES 9-2. FRONT AXLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Air tanks drained (TM 9-2320-365-10). Gravel deflector and gravel deflector extensions removed (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Multiplier, Torque Wrench (Item 35, Appendix B) Trestle, Motor Vehicle Maintenance (2) (Item 71, Appendix B) Lift, Transmission/Differential (Item 32, Appendix B) Jack, Dolly Type, Hydraulic (Item 31, Appendix B) Socket, Left Front Leaf Spring U-Bolt (Item 8, Appendix D) Puller Kit, Universal (Item 44, Appendix B) Hammer, Hand, Soft Head (Item 28, Appendix B) Tools and Special Tools (Cont) Puller, Mechanical (Item 45, Appendix B) Sling, Cargo (Item 48, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) Nut, Self-Locking (2) (Item 126, Appendix F) Pin, Cotter (2) (Item 227, Appendix F) Nut, Self-Locking (8) (Item 124, Appendix F) Washer (2) (Item 294, Appendix F) Bracket (2, if required) (Item 16, Appendix F) Washer, Brake Housing (2, if required) (Item 296, Appendix F) Screw, Self-locking (4) (Item 251.1, Appendix F) U-bolt (4) (Item 15.1, Appendix F) Personnel Required (3) WARNING Wear appropriate eye protection when working under vehicle due to possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Deleted (2) Deleted 9-2 Change 1